Technology parameters
1.Output Connector RS485
2.Power Supply Voltage DC9V-24V
3.Rated current 0.5 A
4.The maximum power 5 W
5.The environment temperature -10℃ ~ 40 ℃
6.Appearance size 118 * 65 * 25 MM
Key function and characteristics
1.2.4GHZ frequency transmission,control chip import from Sweden.
2.99 channels for your choose.
3.Both of one to multiple or one to one for signal transmission is available.
4.Transmission distance 300 meters in open ground,if add a high-ganin antenna,the maximum transmission distance go to 2KM.
5.DMX standard input or output.
6.Especially apply to building,bridge,etc,long distance lighting data transmission.
7.Built-in Flash chip of controller which can run off-line after download the program to flash chip.
8.Use multiple controller constitute a network and working synchronous is possible.
9.With remote control and wireless online capabilities.
10.Running synchronous with PC.
11.Update program by USB COMMunication cable or wireless is available.
12. Each one up control 200 group RGB,need not add Sub-controller;
Product Introduction
LED lighting controller, standard DMX512A signal, on-line / off-line operation, sound controller selectable, cascade connection from one to another to build a large-scale LED network control.built-in FLASH memory, no need additional SD card, operate easily as a USB flash drive to save and manage files, output signal via port 2 of “DMX Out”.
USB to DMX multiply controller
Features:
1.Run by ColorEdit_DMX software, output DMX signal to realize on-line connection synchronization, or to set and control JC330-3 functions.
2.Open control protocol, work as a USB to DMX512A converter; support other software to control DMX output (but it requires to contact UE sales first).
Off-line DMX Controller
Features:
1.2GB memory, DMX signal output, control as many as 512 pixels.
2.Select file through button (LED display to show current file name), can save 99 files.
3.RS485 port, receive command from computer or another controller (send command via required command format)
4.Sound controllable (need to connect with additional sound controller).
5.Multiply JC-3RF controllers, synchronization play, create partition file for the same file (the first 2 numbers of a file name are the partition number) when connect control ports together.
